Footing driven into stable ground
Steps rest on a true footing set into solid subgrade, never bare Blackland clay, so the wet-dry swings that move our soil can't heave or tilt them off a young house the way a hurried builder set tends to wander.
On a new Wylie lot the entry steps and stoop have to be footed correctly from day one, because clay that was only just churned up will work a poorly seated set loose in a hurry. We build them with even, code-built risers on footings driven into stable ground so North Texas clay can't tip them, then tie them into the young house cleanly.
Credibility comes from how it's built, not from promises. Here's the order of operations on every concrete steps & stairs job.
Steps rest on a true footing set into solid subgrade, never bare Blackland clay, so the wet-dry swings that move our soil can't heave or tilt them off a young house the way a hurried builder set tends to wander.
Riser heights are held even and inside code, so the climb feels natural and stays sure underfoot.
Steel in the pour helps the steps hold their edges and corners through season after season of ground movement.
A broom or textured top hands you grip in the rain, and we can blend in more grit anywhere it earns the room.
The new steps marry cleanly to the porch, slab, or walkway so the whole entry reads as a single piece.
Most contractors vanish after the deposit. We pick up the phone, show up when we say, and stand behind the work after the truck leaves. The follow-through is the difference.
A foreman we know runs your job and a vetted crew does the work, managed by Lucky's, one company accountable from the first call to the final walkthrough.
COI and lien waivers on file before we break ground. The documentation that lets commercial clients pay and gives homeowners peace of mind.
Prepped subgrade, reinforced and mixed to spec for the job, and proper curing. We build credibility through the process, not promises. On concrete steps & stairs, that starts with footing driven into stable ground.

Steps usually get quoted as a set rather than by the square foot, shaped by how many risers there are, the footing work, and how the run ties to the house. As a rough opening figure, plan on something like $300 to $500 per step. We hand you the firm number after we have stood at the entry and measured it.
Out here it nearly always traces to a footing dropped on raw, freshly graded clay, which swells and contracts through wet and dry spells and nudges a young set off the porch bit by bit. We reseat the footing in solid subgrade so the soil can't drag the steps along with it.
Risers are kept even and inside local code so every tread meets your foot identically, because one odd step in a run is both jarring and a fall waiting to happen, all the worse when it is slick.
It hinges on the damage. A bit of surface flaking can occasionally be patched, but steps that have leaned on moving clay or cracked across a riser have usually run out of repair and call for a full rebuild on a proper footing. We give you the honest call on which way yours go.
We form and finish the steps and cast railing anchor points right into the pour, then line up the railing install so the finished entry meets the access and safety needs you have.
Plan on staying off the new steps a few days while the concrete cures. We give you the exact timeline for your set before we pour, with the week's heat factored in.
You'll hear back from a real person, usually the same day. No call center, no runaround, no chasing us down.
Booking up fast this season. Or call (469) 375-1157